GD427 in action

GD427 in action

Sunday 8 July 2012

Number Plate

In order to mount a number plate to the number plate bar I made a MDF blank which fits onto the bar using 19mm p-clips. They were a little loose so I used a bit of insulating tape around the bar to pad it out a little. Whilst I haven't got a number plate yet, this area is part of the IVA test and if nothing was fitted in this area it would be fail.

This gave me a chance to get some of my power tools out that haven't been used in while and I used a router to put a nice radius on the edge of the MDF.


No comments: